⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Winneshiek County › Calmar (52132)

Calmar, IA (52132): well depth, water level & drilling cost

✓ 222 Iowa DNR records · Winneshiek County

275 ftmedian well depth
195 ft–400 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Calmar (52132) address — $49

How deep are wells in and around Calmar (52132), Iowa?

The median drilled well depth in and around Calmar (52132) is 275 ft, based on 204 wells with recorded depths in the state Iowa DNR database. Half fall between 195 ft and 400 ft; 90% are shallower than 500 ft.

How much does it cost to drill a well in and around Calmar (52132)?

Applying published per-foot rates to the local median depth of 275 ft: drilling and casing alone typically runs $6,875–$17,875; a complete system including pump, pressure tank, and hookup typically runs $16,500–$27,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Calmar (52132)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 15 50–100 ft 18 100–150 ft 11 150–200 ft 7 200–300 ft 55 300–400 ft 46 400–600 ft 41 600+ ft 11
Looking at a specific property in Calmar (52132)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Calmar (52132)

Free. Goes to licensed drillers working Winneshiek County.

Part of Winneshiek County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.