⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Delaware County › Earlville (52041)

Earlville, IA (52041): well depth, water level & drilling cost

✓ 366 Iowa DNR records · Delaware County

180 ftmedian well depth
136 ft–220 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Earlville (52041) address — $49

How deep are wells in and around Earlville (52041), Iowa?

The median drilled well depth in and around Earlville (52041) is 180 ft, based on 358 wells with recorded depths in the state Iowa DNR database. Half fall between 136 ft and 220 ft; 90% are shallower than 256 ft.

How much does it cost to drill a well in and around Earlville (52041)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Earlville (52041)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 14 50–100 ft 45 100–150 ft 47 150–200 ft 120 200–300 ft 105 300–400 ft 4 400–600 ft 12 600+ ft 11
Looking at a specific property in Earlville (52041)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Earlville (52041)

Free. Goes to licensed drillers working Delaware County.

Part of Delaware County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.