⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Tama County › Garwin (50632)

Garwin, IA (50632): well depth, water level & drilling cost

✓ 125 Iowa DNR records · Tama County

100 ftmedian well depth
40 ft–244 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Garwin (50632) address — $49

How deep are wells in and around Garwin (50632), Iowa?

The median drilled well depth in and around Garwin (50632) is 100 ft, based on 113 wells with recorded depths in the state Iowa DNR database. Half fall between 40 ft and 244 ft; 90% are shallower than 426 ft.

How much does it cost to drill a well in and around Garwin (50632)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Garwin (50632)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 31 50–100 ft 8 100–150 ft 29 150–200 ft 9 200–300 ft 14 300–400 ft 6 400–600 ft 14 600+ ft 2
Looking at a specific property in Garwin (50632)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Garwin (50632)

Free. Goes to licensed drillers working Tama County.

Part of Tama County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.