⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Butler County › Clarksville (50619)

Clarksville, IA (50619): well depth, water level & drilling cost

✓ 449 Iowa DNR records · Butler County

100 ftmedian well depth
65 ft–161 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Clarksville (50619) address — $49

How deep are wells in and around Clarksville (50619), Iowa?

The median drilled well depth in and around Clarksville (50619) is 100 ft, based on 442 wells with recorded depths in the state Iowa DNR database. Half fall between 65 ft and 161 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Clarksville (50619)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Clarksville (50619)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 97 50–100 ft 79 100–150 ft 134 150–200 ft 73 200–300 ft 58 300–400 ft 0 400–600 ft 1 600+ ft 0
Looking at a specific property in Clarksville (50619)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Clarksville (50619)

Free. Goes to licensed drillers working Butler County.

Part of Butler County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.