⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Calhoun County › Farnhamville (50538)

Farnhamville, IA (50538): well depth, water level & drilling cost

✓ 195 Iowa DNR records · Calhoun County

79 ftmedian well depth
50 ft–180 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Farnhamville (50538) address — $49

How deep are wells in and around Farnhamville (50538), Iowa?

The median drilled well depth in and around Farnhamville (50538) is 79 ft, based on 190 wells with recorded depths in the state Iowa DNR database. Half fall between 50 ft and 180 ft; 90% are shallower than 302 ft.

How much does it cost to drill a well in and around Farnhamville (50538)?

Applying published per-foot rates to the local median depth of 79 ft: drilling and casing alone typically runs $1,975–$5,135; a complete system including pump, pressure tank, and hookup typically runs $4,740–$7,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Farnhamville (50538)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 41 50–100 ft 66 100–150 ft 17 150–200 ft 26 200–300 ft 18 300–400 ft 10 400–600 ft 7 600+ ft 5
Looking at a specific property in Farnhamville (50538)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Farnhamville (50538)

Free. Goes to licensed drillers working Calhoun County.

Part of Calhoun County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.