⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Hancock County › Woden (50484)

Woden, IA (50484): well depth, water level & drilling cost

✓ 208 Iowa DNR records · Hancock County

170 ftmedian well depth
115 ft–240 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Woden (50484) address — $49

How deep are wells in and around Woden (50484), Iowa?

The median drilled well depth in and around Woden (50484) is 170 ft, based on 197 wells with recorded depths in the state Iowa DNR database. Half fall between 115 ft and 240 ft; 90% are shallower than 296 ft.

How much does it cost to drill a well in and around Woden (50484)?

Applying published per-foot rates to the local median depth of 170 ft: drilling and casing alone typically runs $4,250–$11,050; a complete system including pump, pressure tank, and hookup typically runs $10,200–$17,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Woden (50484)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 8 50–100 ft 25 100–150 ft 37 150–200 ft 51 200–300 ft 58 300–400 ft 13 400–600 ft 5 600+ ft 0
Looking at a specific property in Woden (50484)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Woden (50484)

Free. Goes to licensed drillers working Hancock County.

Part of Hancock County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.