⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Mitchell County › Toeterville (50481)

Toeterville, IA (50481): well depth, water level & drilling cost

✓ 120 Iowa DNR records · Mitchell County

100 ftmedian well depth
100 ft–137 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Toeterville (50481) address — $49

How deep are wells in and around Toeterville (50481), Iowa?

The median drilled well depth in and around Toeterville (50481) is 100 ft, based on 107 wells with recorded depths in the state Iowa DNR database. Half fall between 100 ft and 137 ft; 90% are shallower than 166 ft.

How much does it cost to drill a well in and around Toeterville (50481)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Toeterville (50481)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 11 50–100 ft 13 100–150 ft 63 150–200 ft 15 200–300 ft 5 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Toeterville (50481)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Toeterville (50481)

Free. Goes to licensed drillers working Mitchell County.

Part of Mitchell County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.