⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Winnebago County › Thompson (50478)

Thompson, IA (50478): well depth, water level & drilling cost

✓ 179 Iowa DNR records · Winnebago County

164 ftmedian well depth
145 ft–200 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Thompson (50478) address — $49

How deep are wells in and around Thompson (50478), Iowa?

The median drilled well depth in and around Thompson (50478) is 164 ft, based on 168 wells with recorded depths in the state Iowa DNR database. Half fall between 145 ft and 200 ft; 90% are shallower than 261 ft.

How much does it cost to drill a well in and around Thompson (50478)?

Applying published per-foot rates to the local median depth of 164 ft: drilling and casing alone typically runs $4,100–$10,660; a complete system including pump, pressure tank, and hookup typically runs $9,840–$16,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Thompson (50478)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 2 50–100 ft 14 100–150 ft 30 150–200 ft 78 200–300 ft 33 300–400 ft 5 400–600 ft 4 600+ ft 2
Looking at a specific property in Thompson (50478)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Thompson (50478)

Free. Goes to licensed drillers working Winnebago County.

Part of Winnebago County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.