⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Franklin County › Hampton (50441)

Hampton, IA (50441): well depth, water level & drilling cost

✓ 464 Iowa DNR records · Franklin County

100 ftmedian well depth
53 ft–110 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Hampton (50441) address — $49

How deep are wells in and around Hampton (50441), Iowa?

The median drilled well depth in and around Hampton (50441) is 100 ft, based on 435 wells with recorded depths in the state Iowa DNR database. Half fall between 53 ft and 110 ft; 90% are shallower than 150 ft.

How much does it cost to drill a well in and around Hampton (50441)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hampton (50441)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 93 50–100 ft 104 100–150 ft 161 150–200 ft 45 200–300 ft 9 300–400 ft 3 400–600 ft 18 600+ ft 2
Looking at a specific property in Hampton (50441)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hampton (50441)

Free. Goes to licensed drillers working Franklin County.

Part of Franklin County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.