⟁ Iowa Well Data field records · 2026 survey

Iowa Well Data › Dallas County › Perry (50220)

Perry, IA (50220): well depth, water level & drilling cost

✓ 160 Iowa DNR records · Dallas County

88 ftmedian well depth
31 ft–138 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Perry (50220) address — $49

How deep are wells in and around Perry (50220), Iowa?

The median drilled well depth in and around Perry (50220) is 88 ft, based on 142 wells with recorded depths in the state Iowa DNR database. Half fall between 31 ft and 138 ft; 90% are shallower than 273 ft.

How much does it cost to drill a well in and around Perry (50220)?

Applying published per-foot rates to the local median depth of 88 ft: drilling and casing alone typically runs $2,200–$5,720; a complete system including pump, pressure tank, and hookup typically runs $5,280–$8,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Perry (50220)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 48 50–100 ft 29 100–150 ft 30 150–200 ft 10 200–300 ft 13 300–400 ft 7 400–600 ft 1 600+ ft 4
Looking at a specific property in Perry (50220)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Perry (50220)

Free. Goes to licensed drillers working Dallas County.

Part of Dallas County well records.

Method: medians computed from Iowa DNR records (Iowa DNR Well Information System records, water-supply wells only (monitoring, test, dewatering, injection and closed-loop geothermal wells excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.